TECHTONGDA 71in Acrylic Heat Bending Machine - 110V Plastic Sheet Bender for PVC & Acrylic, Manual Strip Heater for 1mm-6mm Thickness - Perfect for Sign Making, DIY Projects & Craft Bending

Parameter Voltage： 110V Frequency：50/60Hz Power： 300W/800W/1500W/2000W Maximum Bending Width： 12in(300mm)24in(600mm)48in(1220mm)71in(1800mm) Heating Thickness： 0.04" – 0.24" (1mm - 6mm) Package Type：Cardboard Box Attention 1. Machine should be placed in dry, clean, ventilated position, the operation of the machine placed in a horizontal position and smooth. Keep away from flammables and explosives. 2. For safety reasons, must be connected to a reliable safety grounding device must have three feet with ground connection. 3. The heating process leads to high temperature, so avoid contacting the heating area with fingers or skin. 4. Unplug the power cable/cord, if the machine will not be used in a long time. Description The acrylic bending machine heater is the core part of bending machine. You can assemble various kinds of ideal practical acrylic bender with this heater. Processing Material: Acrylic, Plastic, PVC, Plexiglass. Used for: This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates. The acrylic bending machine heater can bend all kinds of plastic sheet. If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet. You can also use many acrylic bender heaters to heat more bents at the same time. Recommended temperature for some regular materials: Acrylic: 210℃ Perspex: 195℃ PVC sheet: 155℃ ABS: 190℃ PET: 160℃ NOTE: Just for reference, and users may modify them according to their materials and working habits. Package Content 1 Set of Acrylic PVC Bending Machine Heater

Cooling Water System Maximum Bending Width71in/1800mm; Heating Thickness0.04" – 0.24" (1mm - 6mm). With circulating cooling water system on both sides of heating pipe. Circulating cooling water system can make sure other parts (no heating is required) won’t get thermal deformation.

High Quality Material The body is made of special aluminum extrusions, light and practical,low consumption and reliable operation, sturdy and durable at the same time smooth and does not hurt the board.

Adjustable Temperature Heating temperature can be adjusted arbitrarily, according to the melting point of different plastic plates to set up the temperature. If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet.

Simple Operation Free plugging and unplugging, easy to storage and assembles to worktable very conveniently. Processing Material Acrylic, Plastic, PVC, Plexiglass. The connector adopts water and electricity separation interface, more secure.

Wide Application This acrylic bending machine heater can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates.